Lo-Rib™ low profile square rib for shed walls only |
Lo-Rib is the name of Fielder's low profile square rib profile. It is suitable for
wall cladding on steel buildings. It is not suitable for roof cladding or for wall cladding
in cyclonic regions. It is not recommended for wall cladding in steel buildings with walls
higher than 3 metres.
It is available in Colorbond and Zincalume finishes, and it
is manufactured from from high tensile steel in both
0.35mm and 0.42mm base metal thicknesses (BMT).
Lo-Rib brochure
|
|
Lo-Rib with the 0.35mm base metal thickness usually provides the lowest cost wall cladding for metal sheds
in non-cyclonic areas, particularly if the shed is well sheilded from winds by surrounding buildings.
This provides a very nice finish at the lowest price. The disadvantages are that it will dent more easily if
it is impacted by a cricket ball or football. The thicker S-Rib or
TL-5 will be more durable in
this scenario.
|
(Colorbond® and Zincalume® are registered trademarks of BlueScope Steel Limited,
Lo-Rib™ is a registered trademark of Fielders.)
|